manualshive.com logo in svg

D-Link xStack DGS-3612G series, Cli Manual

Share
Download
D-Link xStack DGS-3612G series Cli Manual Download Page 405

xStack

®

 DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual

 

 

402

 

delete authen server_host 

Purpose 

Used to delete a user-defined authentication server host. 

Syntax 

delete authen server_host <ipaddr> protocol [tacacs | xtacacs | 
| radius] 

Description 

This command is used to delete a user-defined authentication 
server host previously created on the Switch. 

Parameters 

server_host <ipaddr>

 – The IP address of the remote server host to 

be deleted. 

protocol 

– The protocol used by the server host to delete. The user 

may choose one of the following: 

ƒ

 

tacacs

 – Enter this parameter if the server host utilizes the 

TACACS protocol. 

ƒ

 

xtacacs

 – Enter this parameter if the server host utilizes 

the XTACACS protocol

. 

ƒ

 

 – Enter this parameter if the server host utilizes 

the protocol. 

ƒ

 

radius 

– Enter this parameter if the server host utilizes the 

RADIUS protocol. 

Restrictions 

Only Administrator-level users can issue this command. 

Example usage: 

To delete a user-defined  authentication server host: 

DGS-3627:5#delete authen server_host 10.1.1.121 protocol  

Command: delete authen server_host 10.1.1.121 protocol  
 
Success. 
 

DGS-3627:5# 

 

show authen server_host 

Purpose 

Used to view a user-defined authentication server host. 

Syntax 

show authen server_host  

Description 

This command is used to view user-defined authentication server hosts 
previously created on the Switch. 

The following parameters are displayed: 

IP Address – The IP address of the authentication server host. 

Protocol – The protocol used by the server host. Possible results will 
include TACACS, XTACACS,  or RADIUS. 

Port – The virtual port number on the server host. The default value is 49.

Timeout – The time in seconds the Switch will wait for the server host to 
reply to an authentication request. 

Retransmit – The value in the retransmit field denotes how many times 
the device will resend an authentication request when the TACACS 
server does not respond. This field is inoperable for the protocol.

Key – Authentication key to be shared with a configured  
server only. 

Parameters None. 

Restrictions 

Only Administrator-level users can issue this command. 

Summary of Contents for xStack DGS-3612G series














































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands