xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
112
based on the remap priority. This flag will only take effect when the remap priority is
set.
Click the
Apply
button to accept the changes made for each individual section.
Click the
Add
button to add a new entry based on the information entered.
Click the
Edit
button to configure the MLD Snooping Multicast VLAN Settings for the specific entry.
Click the
Delete
button to remove the specific entry.
Click the
Profile List
link to configure the MLD Snooping Multicast VLAN Settings for the specific entry.
After clicking the
Edit
button, the following page will appear:
Figure 4–73 MLD Snooping Multicast VLAN Settings – Edit window
The fields that can be configured are described below:
Parameter
Description
VLAN Name
This option will display the VLAN name of the VLAN configured.
State
Use the drop-down menu to enable or disable the state.
Replace Source IP
With the MLD snooping function, the MLD report packet sent by the host will be
forwarded to the source port. Before forwarding of the packet, the source IP
address in the join packet needs to be replaced by this IP address. If none is
specified, the source IP address will not be replaced.
Remap Priority
0-7
– The remap priority value (0 to 7) to be associated with the data traffic to be
forwarded on the multicast VLAN.
None
– If
None
is specified, the packet’s original priority is used. The default setting
is
None
.
Replace Priority
Tick the check box to specify that the packet’s priority will be changed by the
switch, based on the remap priority. This flag will only take effect when the remap
priority is set.
Untagged Member
Ports
Specify the untagged member port of the multicast VLAN. Click the
Select All
button to select all the ports or click the
Clear All
button to unselect all the ports.
Tagged Member Ports
Specify the tagged member port of the multicast VLAN. Click the
Select All
button
to select all the ports or click the
Clear All
button to unselect all the ports.
Untagged Source Ports
Specify the source port or range of source ports as untagged members of the
multicast VLAN. The PVID of the untagged source port is automatically changed to
the multicast VLAN. Source ports must be either tagged or untagged for any single
multicast VLAN, i.e. both types cannot be members of the same multicast VLAN
Tagged Source Ports
Specify the source port or range of source ports as tagged members of the
Summary of Contents for xStack DGS-3120-24TC
Page 1: ......