xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
13
Class 0
– 16200mW
Class 1
– 4200mW
Class 2
– 7400mW
Class 3
– 16200mW
User Define
– 35000mW
Click
Apply
to implement changes made. The port status of all PoE configured ports is displayed in the table in the
bottom half of the screen shown above.
Serial Port Settings
This window allows the user to adjust the Baud Rate and the Auto Logout values.
To view the following window, click
System
Configuration > Serial Port Settings
, as show below:
Figure 2–10 Serial Port Settings window
The fields that can be configured are described below:
Parameter
Description
Baud Rate
Specify the baud rate for the serial port on the Switch. There are four possible baud rates to
choose from,
9600
,
19200
,
38400
and
115200.
For a connection to the Switch using the
console port, the baud rate must be set to
115200
, which is the default setting.
Auto Logout
Select the logout time used for the console interface. This automatically logs the user out
after an idle period of time, as defined. Choose from the following options:
2, 5, 10, 15
minutes
or
Never
. The default setting is
10 minutes
.
Data Bits
Display the data bits used for the serial port connection.
Parity Bits
Display the parity bits used for the serial port connection.
Stop Bits
Display the stop bits used for the serial port connection.
Click the
Apply
button to implement changes made.
Warning Temperature Settings
This window allows the user to configure the system warning temperature parameters.
To view the following window, click
System
Configuration > Warning Temperature Settings
, as show below:
Summary of Contents for xStack DGS-3120-24TC
Page 1: ......
