manualshive.com logo in svg

D-Link xStack DGS-3120-24TC, Product Manual

The D-Link xStack DGS-3120-24TC is a versatile network switch designed for easy deployment and management. Take full advantage of its advanced features and configurations by accessing the comprehensive product manual, available for free download from our website. Find everything you need to know to optimize your network setup efficiently.

Share
Download
background image

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide 

106 

 

VID List 

Specify a list of VLANs to be displayed. 

Port List 

Specify a list of ports to be displayed. 

Click the 

Find 

button to locate a specific entry based on the information entered. 

Click the 

View All

 button to display all the existing entries. 

Click the 

Packet Statistics

 

 link to view the MLD Snooping Counter Settings for the specific entry. 

After clicking the 

Packet Statistics

 link, the following page will appear: 

 

Figure 4–64 Browse MLD Snooping Counter window 

 

Click the 

Clear Counter

 button to clear all the information displayed in the fields. 

Click the 

Refresh 

button to refresh the display table so that new information will appear. 

Click the 

<<Back

 button to return to the previous page. 

 

 

Multicast VLAN 

In a switching environment, multiple VLANs may exist. Every time a multicast query passes through the Switch, the 
switch must forward separate different copies of the data to each VLAN on the system, which, in turn, increases 
data traffic and may clog up the traffic path. To lighten the traffic load, multicast VLANs may be incorporated. 
These multicast VLANs will allow the Switch to forward this multicast traffic as one copy to recipients of the 
multicast VLAN, instead of multiple copies. 

 

Regardless of other normal VLANs that are incorporated on the Switch, users may add any ports to the multicast 
VLAN where they wish multicast traffic to be sent. Users are to set up a source port, where the multicast traffic is 
entering the switch, and then set the ports where the incoming multicast traffic is to be sent. The source port cannot 
be a recipient port and if configured to do so, will cause error messages to be produced by the switch. Once 
properly configured, the stream of multicast data will be relayed to the receiver ports in a much more timely and 
reliable fashion. 

 

The Multicast VLAN feature of this Switch does have some restrictions and limitations, such as: 

Restrictions and Provisos: 

1.  Multicast VLANs can be implemented on edge and non-edge switches. 

2.  Member ports and source ports can be used in multiple ISM VLANs. But member ports and source ports 

cannot be the same port in a specific ISM VLAN. 

3.  The Multicast VLAN is exclusive with normal 802.1q VLANs, which means that VLAN IDs (VIDs) and VLAN 

Names of 802.1q VLANs and ISM VLANs cannot be the same. Once a VID or VLAN Name is chosen for 
any VLAN, it cannot be used for any other VLAN. 

Summary of Contents for xStack DGS-3120-24TC




















































































































































































































































































































































Reviews:

No comments

Related manuals for xStack DGS-3120-24TC

AbleNet HouseMate Quick Start Manual preview
HouseMate
Brand: AbleNet Pages: 2
D-Box HaptiSync Hub User Manual preview
HaptiSync Hub
Brand: D-Box Pages: 27
Vector MZ3-V01 Quick Start Manual preview
MZ3-V01
Brand: Vector Pages: 3
NETGEAR 748TP Hardware Installation Manual preview
748TP
Brand: NETGEAR Pages: 36
DITEC COM500ER Installation Manual preview
COM500ER
Brand: DITEC Pages: 8
Cooper Crouse-Hinds CEAG KO Operating Instructions Manual preview
Crouse-Hinds CEAG KO
Brand: Cooper Pages: 12
Linksys SRW208L Product Data preview
SRW208L
Brand: Linksys Pages: 3
Intermatic T7802BC Supplementary Manual preview
T7802BC
Brand: Intermatic Pages: 1
Aquatlantis tecatlantis EASY LED CONTROL 2 PLUS User Manual preview
tecatlantis EASY LED CONTROL 2 PLUS
Brand: Aquatlantis Pages: 4
Fairchild FPS FSDH0265RN Manual preview
FPS FSDH0265RN
Brand: Fairchild Pages: 20
SUCO 0140 Series Operating Instructions preview
0140 Series
Brand: SUCO Pages: 2
LevelOne FSW-1640TX User Manual preview
FSW-1640TX
Brand: LevelOne Pages: 35
Unipoe PM5003GSN User Manual preview
PM5003GSN
Brand: Unipoe Pages: 9
Cabletron Systems ELS10-26TX User Manual preview
ELS10-26TX
Brand: Cabletron Systems Pages: 116
TekTone Tek-CARE NC554/8 Installation Instructions preview
Tek-CARE NC554/8
Brand: TekTone Pages: 2
T.I.P. TLS 100 E Manual preview
TLS 100 E
Brand: T.I.P. Pages: 42
Generac Power Systems TRANSFER SWITCH Warranty Information Booklet preview
TRANSFER SWITCH
Brand: Generac Power Systems Pages: 1
National Instruments SCXI-1130 Getting Started Manual preview
SCXI-1130
Brand: National Instruments Pages: 23

Brands by name

Popular brands

Load more brands