xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
67
packets. If the port is specified to accept only tagged frames - as tagging, and an
untagged packet is forwarded to the port for transmission, the port will add an
802.1Q tag using the PVID to write the VID in the tag. When the packet arrives at
its destination, the receiving device will use the PVID to make VLAN forwarding
decisions. If the port receives a packet, and Ingress filtering is
Enabled
, the port will
compare the VID of the incoming packet to its PVID. If the two are unequal, the port
will drop the packet. If the two are equal, the port will receive the packet.
GVRP
The GARP VLAN Registration Protocol (GVRP) enables the port to dynamically
become a member of a VLAN. GVRP is
Disabled
by default.
Ingress Checking
This drop-down menu allows the user to enable the port to compare the VID tag of
an incoming packet with the port VLAN membership. If enable ingress checking
and the reception port is not the member port of the frame’s VLAN, the frame shall
be discarded.
Acceptable Frame Type
This field denotes the type of frame that will be accepted by the port. The user may
choose between
Tagged Only
, which means only VLAN tagged frames will be
accepted, and
All
, which mean both tagged and untagged frames will be accepted.
All
is enabled by default.
Click the
Apply
button to accept the changes made.
MAC-based VLAN Settings
Users can create new MAC-based VLAN entries, search and delete existing entries. When a static MAC-based
VLAN entry is created for a user, the traffic from this user will be able to be serviced under the specified VLAN
regardless of the authentication function operating on this port.
To view the following window, click
L2 Features > VLAN > MAC-based VLAN Settings
, as show below:
Figure 4–13 MAC-based VLAN Settings
The fields that can be configured are described below:
Parameter
Description
MAC Address
Specify the MAC address to be re-authenticated by entering it into the MAC Address
field.
VID
Select this option and enter the VLAN ID.
VLAN Name
Select this option and enter the VLAN name of a previously configured VLAN.
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Add
button to add a new entry based on the information entered.
Click the
View All
button to display all the existing entries.
Click the
Delete All
button to remove all the entries listed.
Click the
Delete
button to remove the specific entry.
Private VLAN Settings
A private VLAN is comprised of a primary VLAN, up to one isolated VLAN, and a number of community VLANs. A
private VLAN ID is presented by the VLAN ID of the primary VLAN. The command used to associate or de-
Summary of Contents for xStack DGS-3120-24TC
Page 1: ......