xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
51
Figure 3–39 SNMP Engine ID Settings window
The fields that can be configured are described below:
Parameter
Description
Engine ID
To change the Engine ID, type the new Engine ID value in the space provided. The SNMP
engine ID displays the identification of the SNMP engine on the Switch. The default value is
suggested in RFC2271. The very first bit is 1, and the first four octets are set to the binary
equivalent of the agent’s SNMP management private enterprise number as assigned by
IANA (D-Link is 171). The fifth octet is 03 to indicate the rest is the MAC address of this
device. The sixth to eleventh octets is the MAC address.
Click the
Apply
button to accept the changes made.
NOTE:
The Engine ID length is 10-64 and accepted characters can range from 0 to F.
SNMP User Table Settings
This window
displays all of the SNMP User’s currently configured on the Switch.
To view the following window, click
Management > SNMP Settings > SNMP User Table Settings
, as show below:
Figure 3–40 SNMP User Table Settings window
The fields that can be configured are described below:
Parameter
Description
User Name
An alphanumeric string of up to 32 characters. This is used to identify the SNMP
users.
Group Name
This name is used to specify the SNMP group created can request SNMP messages.
SNMP Version
V3
– Indicates that SNMP version 3 is in use.
SNMP V3 Encryption
Use the drop-down menu to enable encryption for SNMP V3. This is only operable in
SNMP V3 mode. The choices are
None
,
Password
, or
Key
.
Auth-Protocol
MD5
– Specify that the HMAC-MD5-96 authentication level will be used. This field is
Summary of Contents for xStack DGS-3120-24TC
Page 1: ......