Weight
Net weight: 3.5 kg
Dimensions
(L x W x H)
436 mm x 346 mm x 45 mm
M8600-02XFP24SFP/12GT-E
Module Appearance
Figure 1-29 Appearance of the M8600-02XFP24SFP/12GT-E
External Interface
The M8600-02XFP24SFP/12GT-E provides two 10G XFP ports, twelve SFP ports and twelve fiber/copper combo ports.
The SFP ports support the rate of 1000Mbps, the RJ45 ports support auto-negotiation at 10/100/1000 Mbps and the XFP
and SFP optical modules support hot swapping.
LED
Sign
Description
Detailed information
Status
System LED
OFF: The module is not powered on.
Red: The module is faulty.
Blinking green: The module is initializing. If it keeps blinking, the
module may be faulty.
Solid green: The module has finished initialization and can perform
switching well.
Module
Optical
module
availability LED
OFF: The optical module is not available.
Green: The optical module is available.
Link/ACT
Port status LED
OFF: The port link is not up.
Green: The port link is up.
Blinking green: The port is sending and receiving data.
Specifications
Model
M8600-02XFP24SFP/12GT-E
Standard
Compliance
IEEE 802.3-2005 Ethernet Standard
Port Type
Two 10G XFP ports, twelve SFP 1000M ports and twelve fiber/copper combo ports
Transmission
Medium
1000BASE-SX(850nm)
Multi-mode optical fiber
1000BASE-LX(1310nm)
Single-mode optical fiber
1000BASE-LH40(1310nm)
Single-mode optical fiber
1000BASE-ZX(1550nm)
Single-mode optical fiber
10/100/1000BASE-T
Cat-5 UTP
LED
Status, Link/ACT, module LEDs
Hot Swapping
Supported
Power
Consumption
<75W
EMC Standards
GB9254-2008
Safety Standards
GB4943-2011
Operating
Temperature
0 to 40°C
Storage
Temperature
-40 to 70°C
Operating
Humidity
10% to 90% RH (non-condensing)
Weight
Net weight: 2.8 kg
Dimensions
(L x W x H)
436 mm x 346 mm x 45 mm
The M8600-02XFP24SFP/12GT-E module provides twelve 10/100/1000BASE-T combo ports with RJ45 ports as the
SFP fiber ports. In other words, each 10/100/1000BASE-T port corresponds to one combo SFP fiber port, and only
one port can be used at a time, while the other is unavailable. The automatic MDI/MDI-X identification of the
10/100/1000M copper ports takes effect only when auto-negotiation is enabled.
Summary of Contents for RG-S8606 B
