105
D-Link DIR-845L User Manual
Section 3 - Configuration
IPv6 Firewall
The DIR-845L’s IPv6 Firewall feature allows you to configure which kind of IPv6 traffic is allowed to pass through the device.
The DIR-845L’s IPv6 Firewall functions in a similar way to the IP Filters feature.
Check the box to enable the IPv6 firewall simple security.
Select an action from the drop-down menu.
Enter a name to identify the IPv6 firewall rule.
Use the drop-down menu to select the time schedule that
the IPv6 Firewall Rule will be enabled on. The schedule may
be set to
Always
, which will allow the particular service to
always be enabled. You can create your own times in the
Tools
>
Schedules
section.
Use the
Source
drop-down menu to specify the interface
that connects to the source IPv6 addresses of the firewall
rule.
Enter the source IPv6 address range in the adjacent
IP Address Range
field.
Use the
Dest
drop-down menu to specify the interface that connects to the destination IP addresses of the firewall rule.
Select the protocol of the firewall port (
All
,
TCP
,
UDP
, or
ICMP
).
Enter the first port of the range that will be used for the firewall rule in the first box and enter the last port in the field in the second
box.
Enable Checkbox:
Configure IPv6
Firewall:
Name:
Schedule:
Source:
IP Address Range:
Dest:
Protocol:
Port Range:
