D-Link DIR-845L Page 70 User Manual Download

Page: 70 / 155

D-Link DIR-845L User Manual

In the

Number Devices

section, the user can view information about the external USB storage devices inserted into the USB port of this router.

The following parameters will be available in the display

Number of Devices:

This field will display the number of USB

storage devices that are attached to the

USB port of the router.

Device:

This field will display the USB storage

device’s name.

Total Space:

This field will display the total space that is available on the USB storage device attached.

Free Space:

This field will display the free space that is available on the USB storage device attached.

In the

HTTP Storage Link

section, the user can use this link to connect to the drive remotely after logging in with a user account.

Notice the path of the link(s) provided will point the external interface

of this router. If no

DDNS

account is specified on the

Dynamic DNS

page, the WAN IP address will be used. If, however, a

DDNS

account is

specified, then the domain name will be used.

Click on the

Save Settings

button to accept the changes made.

Click on the

Don’t Save Settings

button to discard the changes made.

Summary of Contents for DIR-845L




























































































































































Search results

Summary of Contents for DIR-845L

Reviews:

Related manuals for DIR-845L

Brands by name

Popular brands

D-Link DIR-845L, User Manual

Search results

Summary of Contents for DIR-845L

Reviews:

Related manuals for DIR-845L

Brands by name

Popular brands