D-Link DIR-845L User Manual Download Page 145

Page: 145 / 155

141

D-Link DIR-845L User Manual

Section 6 - Troubleshooting

• Configure your Internet settings:

• Go to

Start

Settings

Control.Panel

. Double-click the

Internet.Options

Icon. From the

Security

tab, click

the button to restore the settings to their defaults.

• Click the

Connection

tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button.

Make sure nothing is checked. Click

• Go to the

Advanced

tab and click the button to restore these settings to their defaults. Click

three times.

• Close your web browser (if open) and open it.

• Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This

should open the login page for your web management.

• If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30

seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer.

2..What.can.I.do.if.I.forgot.my.password?

If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back to the

factory defaults.

To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip

to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30

seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is

admin

and leave the

password box empty.

Summary of Contents for DIR-845L




























































































































































Search results

Summary of Contents for DIR-845L

Reviews:

Related manuals for DIR-845L

Brands by name

Popular brands

D-Link DIR-845L, User Manual

Search results

Summary of Contents for DIR-845L

Reviews:

Related manuals for DIR-845L

Brands by name

Popular brands