D-Link DIR-845L Page 100 User Manual Download

Page: 100 / 155

D-Link DIR-845L User Manual

Section 3 - Configuration

Enter a name for the inbound filter rule.

Select

Allow

Deny

Check to enable rule.

Enter the starting IP address. Enter 0.0.0.0 if you

do not want to specify an IP range.

Enter the ending IP address. Enter 255.255.255.255

if you do not want to specify and IP range.

Click the

Add

button to apply your settings. You

must click

Save.Settings

at the top to save the

settings.

This section will list any rules that are created. You

may click the

Edit

icon to change the settings or

enable/disable the rule, or click the

Delete

icon

to remove the rule.

Name:

Action:

Enable:

Remote IP Start:

Remote IP End:

Add:

Inbound Filter

Rules List:

The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can

configure inbound data filtering rules that control data based on an IP address range. Inbound Filters can be used with Virtual

Server, Port Forwarding, or Remote Administration features.

Inbound Filters

Summary of Contents for DIR-845L




























































































































































Search results

Summary of Contents for DIR-845L

Reviews:

Related manuals for DIR-845L

Brands by name

Popular brands

D-Link DIR-845L, User Manual

Search results

Summary of Contents for DIR-845L

Reviews:

Related manuals for DIR-845L

Brands by name

Popular brands