D-Link DIR-845L Page 119 User Manual Download

Page: 119 / 155

115

D-Link DIR-845L User Manual

Section 3 - Configuration

Enter a name for your new schedule.

Select a day, a range of days, or All Week to include

every day.

Check

All.Day.-.24hrs

or enter a start and end

time for your schedule.

You must click

Save.Settings

at the top for your

schedules to go into effect.

The list of schedules will be listed here. Click the

Edit

icon to make changes or click the

Delete

icon

to remove the schedule.

Name:

Days:

Time:

Save:

Schedule Rules

List:

Schedules

Schedules can be created for use with enforcing rules. For example, if you want to restrict web access to Mon-Fri from 3pm to

8pm, you could create a schedule selecting Mon, Tue, Wed, Thu, and Fri and enter a Start Time of 3pm and End Time of 8pm.

Summary of Contents for DIR-845L




























































































































































Search results

Summary of Contents for DIR-845L

Reviews:

Related manuals for DIR-845L

Brands by name

Popular brands

D-Link DIR-845L, User Manual

Search results

Summary of Contents for DIR-845L

Reviews:

Related manuals for DIR-845L

Brands by name

Popular brands