D-Link DIR-845L Page 67 User Manual Download

Page: 67 / 155

D-Link DIR-845L User Manual

Section 3 - Configuration

Parental Control

Parental control is a free security option that provides Anti-Phishing

to protect your Internet connection from fraud and navigation

improvements such as auto-correction of common URL types.

The following parameters will be available for configuration:

Advanced DNS:

Select this option to enable a fast and

reliable DNS with minimal blocking of

phishing sites only. No OpenDNS account

required.

OpenDNS® FamilyShield:

Select this option to enable a fast and

reliable DNS with non-configurable

blocking of sites that are inappropriate or

risky for children. No OpenDNS account

required.

OpenDNS® Parental

Control:

Select this option to enable a fast and

reliable DNS with configurable content

filtering and phishing protection. This

option includes an OpenDNS account.

Click on the ‘

Manage your router

’ link

to navigate to the OpenDNS account

website, where you can either login (if

you have an existing account) or you can

None:

Select this option to enable the option to specify the DNS servers provided via DHCP by their ISP or their own pre-

ferred DNS servers.

Click on the

Save Settings

button to accept the changes made.

Click on the

Don’t Save Settings

button to discard the changes made.

Summary of Contents for DIR-845L




























































































































































Search results

Summary of Contents for DIR-845L

Reviews:

Related manuals for DIR-845L

Brands by name

Popular brands

D-Link DIR-845L, User Manual

Search results

Summary of Contents for DIR-845L

Reviews:

Related manuals for DIR-845L

Brands by name

Popular brands