D-Link DIR-845L Page 107 User Manual Download

Page: 107 / 155

103

D-Link DIR-845L User Manual

Section 3 - Configuration

To use the Universal Plug and Play (UPnP

™

) feature click on

Enabled

. UPnP provides compatibility with networking

equipment, software and peripherals.

Checking the box will allow the DIR-845L to respond

to pings. Unchecking the box may provide some extra

security from hackers.

You may set the port speed of the Internet port to 10Mbps,

100Mbps, 1000Mbps, or Auto (recommended).

Check the box to allow multicast traffic to pass through

the router from the Internet (IPv4).

Check the box to allow multicast traffic to pass through

the router from the Internet (IPv6).

Enable UPnP:

WAN Ping:

WAN Port Speed:

Enable IPV4

Multicast Streams:

Enable IPV6

Multicast Streams:

Advanced Network Settings

Summary of Contents for DIR-845L




























































































































































Search results

Summary of Contents for DIR-845L

Reviews:

Related manuals for DIR-845L

Brands by name

Popular brands

D-Link DIR-845L, User Manual

Search results

Summary of Contents for DIR-845L

Reviews:

Related manuals for DIR-845L

Brands by name

Popular brands