90
D-Link DIR-845L User Manual
Section 3 - Configuration
The following parameters will be available for configuration:
Checkbox:
Tick this option to enable the rule specified.
Name:
Enter a custom name for the rule being created here.
This name is used for identification.
Queue ID:
Select the appropriate priority requirement from the
drop-down menu that will be applied to this rule.
Option to choose from are Highest, Higher, Normal,
and Best Effort.
Protocol:
Select the protocol used for the application for in the
drop-down menu and it will automatically place it in
the Protocol field.
Local IP Range:
Enter the local IP range used here. This is the IP range
of you Local Area Network. The Router’s IP cannot be
included in this range.
Remote IP
Range:
Enter the remote IP range used here. This is the IP
range of the public network from the Internet Port
side. To apply this rule to any IP addresses from the
public side, enter the range 0.0.0.1 to 255.255.255.254.
Application
Port:
Enter the application port number used here.
Click on the
Save Settings
button to accept the changes made.
Click on the
Don’t Save Settings
button to discard the changes made.
After specifying the QoS framework used, in the QoS setup section, the user can now create individual rules for scenarios that require the use of
traffic control and data priority manipulation.
Queue Priority:
In this column the Queue Priority used will be displayed.
Queue Weight:
After choosing to use the Weight Fair Queue option, under Queue Type, the user will be able to manual enter
the Queue Weight for each individual Queue ID.
