D-Link DGS-3212SR Layer 2 Gigabit Ethernet Switch
Port Authenticating Settings
To set the port authenticating settings, open the Security folder, and then the Port Access Entity folder, and then
the PAE System Control folder. Finally click on the Port Authenticating Settings link. This will open the
802.1X Capability Settings page, as shown below.
Figure 17-6. 802.1X Authenticator Settings
To set up the Switch’s 802.1X port-based authentication, select which ports are to be configured in the
From
and
To
fields. Next, enable the ports by selecting
Authenticator
from the drop-down menu under
Capability
.
Click
Apply
to make your change take effect.
Radius Server
Use this menu to configure the settings the switch will use to communicate with a Radius server. To add Radius
server settings click the New button; a separate configuration menu appears. To edit an existing Radius settings
index, select it and click the edit button
89