D-Link DGS-3212SR Layer 2 Gigabit Ethernet Switch
The following parameters are displayed:
Parameter
Description
User Name
An alphanumeric string of up to 32 characters. This is used to identify the
SNMP users.
Group Name
This name is used to specify the SNMP group created that can request
SNMP messages.
SNMP Version
V1
– Indicates that SNMP version 1 will be used.
V2
– Indicates that SNMP version 2 will be used.
V3
– Indicates that SNMP version 3 will be used.
Auth-Protocol
None
−
Indicates that no authorization protocol is in use.
MD5
−
Indicates that the HMAC-MD5-96 authentication level will be used.
SHA
−
Indicates that the HMAC-SHA authentication protocol will be used
.
Priv-Protocol
None
−
Indicates that no authorization protocol is in use.
DES
−
Indicates that DES 56-bit encryption is in use based on the CBC-
DES (DES-56) standard.
To add a new entry to the
SNMP User Table Configuration
, click on the Add button on the
SNMP User Table
page. This will open the
SNMP User Table Configuration
page, as shown below.
Figure 18-3. SNMP User Table Configuration
The following parameters can be set:
Parameter
Description
User Name
An alphanumeric string of up to 32 characters. This is used to identify the
SNMP users.
Group Name
This name is used to specify the SNMP group created that can request
SNMP messages.
92