D-Link DGS-3212SR Layer 2 Gigabit Ethernet Switch
Reset
gives the option of retaining the switch’s User Accounts and History Log while resetting all other
configuration parameters to their factory defaults. If the switch is reset with this option enabled, and
Save
Changes
is not executed, the switch will return to the last saved configuration when rebooted.
The
Reset Config
option will reset all of the switch’s configuration parameters to their factory defaults, without
saving these default values to the switch’s non-volatile RAM. If the switch is reset with this option enabled, and
Save Changes
is not executed, the switch will return to the last saved configuration when rebooted.
In addition, the
Reset System
option is added to reset all configuration parameters to their factory defaults, save
these parameters to the switch’s non-volatile RAM, and then restart the switch. This option is equivalent to
Reset Config
(above) followed by
Save Changes
.
Figure 20-7. Factory Reset
Restart System
The following menu is used to restart the switch.
Clicking the
Yes
radial button will instruct the switch to save the current configuration to non-volatile RAM
before restarting the switch.
Clicking the
No
radial button instructs the switch not to save the current configuration before restarting the
switch. All of the configuration information entered from the last time
Save Changes
was executed, will be lost.
Click the
Restart
button to restart the switch.
Figure 20-8. Restart System
113