D-Link DGS-3212SR Layer 2 Gigabit Ethernet Switch
GVRP
The
Group VLAN Registration Protocol (GVRP) enables the port to
dynamically become a member of a VLAN. GVRP is disabled by default.
Configure 802.1Q Static VLANs
The following figures and tables describe how to set up static VLANs on the switch. Click on the
Static VLAN
Entry
link in the
VLANs
folder to open
the 802.1Q Static VLANs
page, as shown below.
Figure 5-5. 802.1Q Static VLANs Page
The Static VLANs menu lists existing VLANs by their VLAN ID (VID) and by name. To create a new VLAN,
click on the
New
button in the header row of the table. To edit an existing VLAN, click on the
Modify
button of
the VLAN you want to edit. To eliminate an entire VLAN, click on the “
X
” button for the VLAN you wish to
delete.
The user configurable settings are the same when you Add or Modify a VLAN. Read the next section for a
description of these settings.
Add a Static 802.1Q VLAN
The following figure and table describe the parameters that must be configured to add an 802.1Q VLAN on the
switch. Click the
Show All Static VLAN Entries
link to return to the
802.1Q Static VLAN
Entries table.
Figure 5- 6. 802.1Q Static VLANs Entry Settings – Add Screen
Parameter
Description
Unit
Displays the Unit ID of the switch, within the switch stack, that the VLAN
will be created on.
41