D-Link DGS-3212SR User Manual Download Page 11 | Manualshive

Page: 11 / 140

D-Link DGS-3212SR User Manual Download Page 11

D-Link DGS-3212SR Layer 2 Gigabit Ethernet Switch

Section 1

Introduction

Switch Description

Features

Front-Panel Components

Back Panel Description

Plug-in Module Descriptions

Management Options

Switch Description

The DGS-3212SR is a modular Gigabit Ethernet backbone switch designed for adaptability and scalability. The
switch provides a management platform and uplink to backbone for a stacked group of eight of DES-3226S
Layer 2 switches in a star topology arrangement. Alternatively, the switch can utilize up to twelve Gigabit
Ethernet ports to function as a central distribution hub for other switches or switch groups, or routers. The four
built-in combination Gigabit ports have the option of being used as either 1000BASE-T or SFP Gigabit
connections.

Features

•

4 built-in combination 10/100/1000BASE-T/SFP ports

•

Two additional 4-port modules can be added to stack up to 8 additional switches (using IEEE 1394
stacking cables) or up to 8 additional Gigabit Ethernet ports (1000BASE-T or SFP) or use combination
of stacking and Gigabit Ethernet ports.

•

Star topology switch stacking configuration for up to 8 additional DES3226S/SR switches.

•

24 Gbps switching fabric capacity

•

Supports 802.1D STP and 802.1w Rapid Spanning Tree for redundant back up bridge paths

•

Supports 802.1Q VLAN, IGMP snooping, 802.1p Priority Queues, port trunking, port mirroring

•

Multi-layer Access Control (based on MAC address, IP address, VLAN, Protocol, 802.1p, DSCP)

•

Quality of Service (QoS) customized control

•

802.1x (port-based and MAC-based) access control and Radius Client support

•

Administrator-definable port security

•

Per-port bandwidth control

•

IEEE 802.3z and IEEE 802.3x compliant Flow Control for all Gigabit ports

•

SNMP v.1, v.2, v.3 network management, RMON support

•

Supports optional external Redundant Power Supply

•

Supports Web-based management.

•

Supports CLI management

•

Supports DHCP Client.

•

Fully configurable either in-band or out-of-band control via RS-232 console serial connection.

•

Telnet remote control console

•

TFTP upgrade

1

«
...
9
10
11
12
13
...
»

Summary of Contents for DGS-3212SR













































































































































Reviews:

No comments