DAP-1150
Wireless Access Point Supporting Router Mode
User Manual
Configuring Device (Router Mode)
If needed, specify additional settings for your PPTP + Dynamic IP or L2TP + Dynamic IP WAN
connection.
Parameter
Description
Encryption
Select a method of MPPE encryption.
•
No encrypt
: MPPE encryption is not applied.
•
MPPE 40/128 bit
: MPPE encryption with a 40-bit or 128-bit
key is applied.
•
MPPE 40 bit
: MPPE encryption with a 40-bit key is applied.
•
MPPE 128 bit
: MPPE encryption with a 128-bit key is
applied.
MPPE encryption can be applied only if the
MSCHAP
,
MACHAPv2
, or
AUTO
value is selected from the
Authentication algorithm
drop-down list.
Authentication
algorithm
Select a required authentication method from the drop-down list or
leave the
AUTO
value.
MTU
The maximum size of units transmitted by the interface.
Keep Alive
Select the checkbox if you want the access point to
keep you
connected to your ISP even when the connection has been inactive
for a specified period of time. When the checkbox is selected, the
LCP interval
and
LCP fails
fields are available. Specify the
required values.
Extra options
Advanced options of the pppd daemon which need to be specified
for this connection.
Optional
.
Dial on demand
Select the checkbox if you want the access point to establish
connection to the Internet on demand. In the
Maximum idle time
field, specify a period of inactivity (in seconds) after which the
connection should be terminated.
PPP debug
Select the checkbox if you want to log
all data on PPP connection
debugging.
IP received
The IP address assigned by the ISP.
Click the
Next
button to continue.
Page
91
of 175
