D-Link DAP-1150 User Manual Download

Page: 66 / 175

DAP-1150

Wireless Access Point Supporting Router Mode

User Manual

Configuring Device (Access Point Mode)

Configuration

On the

System / Configuration

page, you can save the changed settings to the non-volatile

memory, restore the factory defaults, backup the current configuration, or restore the device's
configuration from a previously created file.

Figure 56. The

System / Configuration

page.

The following buttons are available on the page:

Control

Description

Save

Click the button to save settings to the non-volatile memory. Please,
save settings every time you change the device's parameters.
Otherwise the changes will be lost upon hardware reboot of the
access point.

Factory

Click the button to restore the factory default settings. Also you can
restore the factory defaults via the hardware RESET button (see the

Saving and Restoring Settings

section, page 29).

Backup

Click the button and follow the dialog box appeared to save the
configuration (all settings of the access point) to your PC.

Restore

Click the button to upload a previously saved configuration (all
settings of the access point) from a file on your PC. Click the

Choose/Browse

button to select a previously saved

configuration file located on your PC.

Actions of the

Save

Factory

, and

Backup

buttons also can be performed via the top-page menu

displayed when the mouse pointer is over the

System

caption.

1 The name of the button depends upon the web browser that you use.

Page

of 175

Summary of Contents for DAP-1150
















































































































































































Search results

Summary of Contents for DAP-1150

Reviews:

Related manuals for DAP-1150

Brands by name

Popular brands

D-Link DAP-1150, User Manual

Search results

Summary of Contents for DAP-1150

Reviews:

Related manuals for DAP-1150

Brands by name

Popular brands