DAP-1150
Wireless Access Point Supporting Router Mode
User Manual
Configuring Device (Router Mode)
Also you can set the address of a device connected to the access point's LAN at the moment. To do
this, select the relevant value from the drop-down list located to the right of the field (the field will
be filled in automatically).
Fill in the
IP address
and
Netmask
fields.
In the
Gateway IP address
field, enter the IP address of the gateway used by this WAN
connection.
In the
Primary DNS server
and
Secondary DNS server
fields, enter the addresses of the
primary and secondary DNS servers.
Click the
Next
button to continue.
If needed, enter the IP addresses of the ISP's local resources.
Figure 76. Configuring PPTP + Static IP WAN connection.
To add a route, click the
Add
button or right-click the routing table heading and select the
Add
line
from the shortcut menu displayed.
Click the
Next
button to continue.
Page
83
of 175
