DAP-1150
Wireless Access Point Supporting Router Mode
User Manual
Configuring Device (Router Mode)
Status
The pages of this section display data on the current state of the access point switched to the router
mode:
•
network statistics
•
the routing table
•
data on devices connected to the device's network and its web-based interface.
Network Statistics
On the
Status / Network statistics
page, you can view statistics for all interfaces (connections)
existing in the system. For each connection the following data are displayed: state, IP address,
subnet mask and gateway (if the connection is established), MAC address, MTU value, and volume
of data received and transmitted (with increase of the volume the units of measurement are changed
automatically: byte, Kbyte, Mbyte, Gbyte).
Figure 93. The
Status / Network statistics
page.
Page
100
of 175
