DAP-1150
Wireless Access Point Supporting Router Mode
User Manual
Configuring Device (Access Point Mode)
Telnet
On the
System / Telnet
page, you can enable or disable access to the device settings via TELNET
from your LAN. By default, access is enabled.
Figure 60. The
System / Telnet
page.
To disable access via TELNET, deselect the
On
checkbox and click the
Change
button.
To enable access via TELNET again, select the
On
checkbox. In the
Port
field, enter the number of
the access point's port through which access will be allowed (by default, the port
23
is specified).
Then click the
Change
button.
Page
70
of 175
