D-Link DAP-1150 User Manual Download

Page: 84 / 175

DAP-1150

Wireless Access Point Supporting Router Mode

User Manual

Configuring Device (Router Mode)

If needed, change the connection settings available in the

Miscellaneous

section.

Figure 77.

Configuring PPTP + Static IP WAN connection.

Parameter

Description

Enable RIP

Select the checkbox to allow using RIP for this connection.

Enable IGMP Multicast

Select the checkbox to allow multicast traffic from the external
network (e.g. video streaming) to be received.

NAT

Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.

Firewall

Select the checkbox to enable protection against ARP and DDoS
attacks.

Click the

Next

button to continue.

Page

of 175

Summary of Contents for DAP-1150
















































































































































































Search results

Summary of Contents for DAP-1150

Reviews:

Related manuals for DAP-1150

Brands by name

Popular brands

D-Link DAP-1150, User Manual

Search results

Summary of Contents for DAP-1150

Reviews:

Related manuals for DAP-1150

Brands by name

Popular brands