DAP-1150
Wireless Access Point Supporting Router Mode
User Manual
Configuring Device (Access Point Mode)
In the
DHCP server
section, you can configure the built-in DHCP sever of the access point.
Figure 35. The section for configuring the DHCP server.
Parameter
Description
Mode
An operating mode of the access point's DHCP server.
Enable
: the access point assigns IP addresses to clients
automatically in accordance with the specified parameters. When
this value is selected, the
Start IP
,
End IP
, and the
Lease time
fields are displayed on the page.
Disable
: the access point's DHCP server is disabled, clients' IP
addresses are assigned manually.
Relay
: an external DHCP server is used to assign IP addresses to
clients. When this value is selected, the
External DHCP server IP
field is displayed on the page.
Start IP
The start IP address of the address pool used by the DHCP server to
distribute IP addresses to clients.
End IP
The end IP address of the address pool used by the DHCP server to
distribute IP addresses to clients.
Lease time
The lifetime of IP addresses leased by the DHCP server. At the end
of this period the leased IP address is revoked and can be distributed
to another device, unless the previous device has confirmed the need
to keep the address.
External DHCP server IP
The IP address of the external DHCP server which assigns IP
addresses to the access point's clients.
When all needed settings are configured, click the
Save
button.
Page
40
of 175
