DAP-1150
Wireless Access Point Supporting Router Mode
User Manual
Configuring Device (Router Mode)
Advanced
In this menu you can configure advanced settings of the access point switched to the router mode:
•
enable the UPnP function
•
configure a DDNS service
•
add name servers
•
define static routes
•
switch the device to the other mode
•
create rules for remote access to the web-based interface
•
allow the access point to use IGMP.
UPnP
On the
Advanced / UPnP
page, you can enable the UPnP function.
UPnP is a set of networking protocols designed for automatic configuration of network devices. The
UPnP function performs automatic configuration of the device's parameters for network
applications requiring an incoming connection to the access point.
Figure 128. The
Advanced / UPnP
page.
If you want to manually specify all parameters needed for network applications, deselect the
Enabled
checkbox and click the
Change
button.
If you want to enable the UPnP function in the access point, select the
Enabled
checkbox, select an
interface for which the device's parameters will be automatically configured from the
Interface
drop-down list, and click the
Change
button.
Page
147
of 175
