DAP-1150
Wireless Access Point Supporting Router Mode
User Manual
Configuring Device (Router Mode)
When the
Open
or
Shared
value is selected, the
WEP Encryption settings
section is displayed
(the section is unavailable for the wireless network operating modes which support the standard
802.11n):
Figure 116. The
Open
value is selected from the
Network Authentication
drop-down list.
Parameter
Description
Enable Encryption WEP
The checkbox activating WEP encryption. When the checkbox is
selected, the
Default Key ID
field, the
Encryption Key WEP as
HEX
checkbox, and four
Encryption Key WEP
fields are
displayed on the page. For the
Shared
authentication type the
checkbox is always selected.
Default Key ID
The number of the key (from first to fourth) which will be used for
WEP encryption.
Encryption Key WEP as
HEX
Select the checkbox to set a hexadecimal number as a key for
encryption.
Encryption Key WEP (1-
4)
Keys for WEP encryption. The access point uses the key selected
from the
Default Key ID
drop-down list. It is required to specify all
the fields.
You can specify keys containing 5 or 13 symbols (use digits and/or
Latin characters). If
the
Encryption Key WEP as HEX
checkbox
is selected, you can specify only keys containing 10 symbols (the
digits 0-9 and the characters A-F).
Page
129
of 175
