TITLE
OPERATOR MANUAL
PAGE
PRINTERS
TELEIOS GRANDE H6
12
VERSION
2017JAN23/1
OUT OF
REVISED BY
MUNOZ, ANTONIO
64
FOR THE USER
d·gen International, Inc. - COMPANY PRIVATE (LEVEL 1)
NOT TO BE DISCLOSED TO UNAUTHORIZED PERSONS – PROHIBIDA SU DIVULGACIÓN A PERSONAS NO AUTORIZADAS
DO NOT REPRODUCE WITHOUT AUTHORIZATION – NO REPRODUCIR SIN AUTORIZACIÓN
5
White LED bar’s power connector.
This cable powers up the white LED light bar in the Big Ink System.
6
Ink outlets.
By pushing down the silver fastening is possible to release or insert the ink line without spilling ink.
7
Sensor level connector (K C M Y inks).
This connector sends the signal from the photo-sensors located in the Big Ink System (to measure
the ink level in the cylinder) to the LED ink level indicators.
8
Sensor level connector (SP1 and SP2 inks).
This connector sends the signal from the photo-sensors located in the Big Ink System (to measure
the ink level in the cylinder) to the LED ink level indicators.
Important
Keep always the ink level’s photo sensor emitter and reflector free of ink and dust.
SAFETY DEVICES
1
Emergency push type switch for the printer.
Two at the front on each side. Pushing one of the switches will bring a total stop the carriage and
other moving elements.
2
Open cover switch.
Opening either the front or carriage cover will activate the emergency switch bringing the carriage to
a pause state returning to the home position.
3
Emergency push type switch for the fixation unit.
One located at the control panel. Pushing the switch will cut the electric supply to the heating rods
and both take up and up/down inductive motors.
Note
In case the printer exceeds its operation limits such as over-speed, operational temperature, etc., the
operator may use the emergency switches to bring the printer into an emergency stop.
Note
In case one of the safety devices is broken we strongly recommend the user to replace it with the help of
a qualified technician.
Summary of Contents for TELEIOS GRANDE H6
Page 1: ...OPERATOR MANUAL ...
