manualshive.com logo in svg

d.gen TELEIOS GRANDE H6, Operator'S Manual

The d.gen TELEIOS GRANDE H6 is a cutting-edge textile printer designed for exceptional print quality and high production speed. To ensure a seamless operation, don't forget to grab your free Operator's Manual available for download at our website. Unlock the full potentials of this remarkable product by referring to the detailed manual provided at manualshive.com.

Share
Download
background image

 

TITLE 

OPERATOR MANUAL 

PAGE 

PRINTERS 

TELEIOS GRANDE H6 

54 

VERSION 

2017JAN23/1 

OUT OF 

REVISED BY 

MUNOZ, ANTONIO 

[email protected] 

64 

 

FOR THE USER 

d·gen International, Inc. - COMPANY PRIVATE (LEVEL 1) 

NOT TO BE DISCLOSED TO UNAUTHORIZED PERSONS – PROHIBIDA SU DIVULGACIÓN A PERSONAS NO AUTORIZADAS 

DO NOT REPRODUCE WITHOUT AUTHORIZATION – NO REPRODUCIR SIN AUTORIZACIÓN

 

 

11 

When the PV value reached the SV value you may raise the up/down roller. Move the cursor to 
ROLLER UP/DOWN and then press the ON/OFF button. The X will change to an O when the 
up/down roller reaches the highest point. 

 

 

 

 

 

12 

Once the up/down roller reached the highest point you can start to print. Or resume printing if the job 
was paused. Turn on the fume buster by moving the cursor to SUCTION. Then press the right arrow 
to turn it on. 

 

 

 

 

 

 

Summary of Contents for TELEIOS GRANDE H6

































































Reviews:

No comments

Related manuals for TELEIOS GRANDE H6

Lanier 5722 Datasheet preview
5722
Brand: Lanier Pages: 3
Canon LR1 Quick Start Manual preview
LR1
Brand: Canon Pages: 2
Canon PIXMA TS5340a Getting Started preview
PIXMA TS5340a
Brand: Canon Pages: 34
Canon PIXMA TS3120 Online Manual preview
PIXMA TS3120
Brand: Canon Pages: 369
Dascom T5040 User Manual preview
T5040
Brand: Dascom Pages: 146
Rena AS-150 Service Manual preview
AS-150
Brand: Rena Pages: 59
Ricoh MP 2001 Operating Instructions Manual preview
MP 2001
Brand: Ricoh Pages: 156
Creality HALOT-ONE PRO User Manual preview
HALOT-ONE PRO
Brand: Creality Pages: 24
A&D AD-8120 Instruction Manual preview
AD-8120
Brand: A&D Pages: 32
Xerox WorkCentre PE120i Evaluator Manual preview
WorkCentre PE120i
Brand: Xerox Pages: 8
Olympus U-5RES-ESD Instructions Manual preview
U-5RES-ESD
Brand: Olympus Pages: 16
Lexmark Color Jetprinter 810 Series Quick Install preview
Color Jetprinter 810 Series
Brand: Lexmark Pages: 2
Xerox DocuPrint C3300 DX User Manual preview
DocuPrint C3300 DX
Brand: Xerox Pages: 200
Xerox N2125N - DocuPrint B/W Laser Printer Service Manual preview
N2125N - DocuPrint B/W Laser Printer
Brand: Xerox Pages: 335
FujiFilm 16558126 User Manual preview
16558126
Brand: FujiFilm Pages: 28
Triumph Adler P-C2665 User Manual preview
P-C2665
Brand: Triumph Adler Pages: 202
Xerox 6250N - Phaser Color Laser Printer Service Manual preview
6250N - Phaser Color Laser Printer
Brand: Xerox Pages: 467
Epson AcuLasaer C1900 Quick Reference Manual preview
AcuLasaer C1900
Brand: Epson Pages: 17

Brands by name

Popular brands

Load more brands