TITLE
OPERATOR MANUAL
PAGE
PRINTERS
TELEIOS GRANDE H6
57
VERSION
2017JAN23/1
OUT OF
REVISED BY
MUNOZ, ANTONIO
64
FOR THE USER
d·gen International, Inc. - COMPANY PRIVATE (LEVEL 1)
NOT TO BE DISCLOSED TO UNAUTHORIZED PERSONS – PROHIBIDA SU DIVULGACIÓN A PERSONAS NO AUTORIZADAS
DO NOT REPRODUCE WITHOUT AUTHORIZATION – NO REPRODUCIR SIN AUTORIZACIÓN
14. EXCHANGING THE MEDIA.
Exchanging the media is possible after pausing/cancelling the printing process.
1. Pause/Cancel the current job.
2. Switch off the take-up and the feeder.
3. Make sure the rear dancing bar is in the lowest position. If not, you may feed media manually.
4. Once the dancing roller is in the lowest point you may cut the media.
5. Release the latches at both side of the feeding unit to remove the pneumatic shaft.
6. Press the golden valve to release all the air inside the pneumatic tube.
7. Remove the pneumatic shaft from the media’s core.
8. Place the pneumatic shaft in the new media’s core. In such way, the printable area faces upwards
when on the platen.
9. With the help of an air compressor (only the air gun is provided) stick the gun to the golden valve and
apply compressed air until an approximate value of 5 bars is reached (or more).
10. Lift the pneumatic shaft with the roll fastened and place it carefully in the feeding unit.
11. Insert back the latches at both sides of the feeding unit to safely secure the pneumatic shaft.
12. Feed some media and attach the new media with the previous one.
Summary of Contents for TELEIOS GRANDE H6
Page 1: ...OPERATOR MANUAL ...
