TITLE
OPERATOR MANUAL
PAGE
PRINTERS
TELEIOS GRANDE H6
36
VERSION
2017JAN23/1
OUT OF
REVISED BY
MUNOZ, ANTONIO
64
FOR THE USER
d·gen International, Inc. - COMPANY PRIVATE (LEVEL 1)
NOT TO BE DISCLOSED TO UNAUTHORIZED PERSONS – PROHIBIDA SU DIVULGACIÓN A PERSONAS NO AUTORIZADAS
DO NOT REPRODUCE WITHOUT AUTHORIZATION – NO REPRODUCIR SIN AUTORIZACIÓN
4
To stop the heads dripping ink, open the solenoid valves again by switching ON the white LED
buttons. Press the HOME button to raise the capping station. Wait until all the subtanks are full and
the JETTING message is displayed.
5
Press the CLEANING button to purge and wipe the heads. After this process is done the operator
may perform a nozzle check test print to see if the nozzles recovered.
Important
Do not press the CANCEL button when purging ink.
Important
The printer cannot purge or clean the print heads having one of the subtanks empty. To purge or clean
the print heads, all subtanks must be full and displaying the JETTING message in the touch panel.
Important
Every time before purging or cleaning the print heads verify the ink drain bottle is empty.
Note
The ink supply pump will be activated 10 times until the subtank is refilled. If the
subtank still didn’t get refilled after the 10 attempts, the printer will activate a
buzzer and become to a pause. Make sure the Big Ink System has enough ink.
Press the INK RESET button in the SETTINGS MENU to activate the ink supply
pump another 10 times.
Note
It is possible to purge or clean only one color. Switch OFF the white LED buttons for the remaining colors
leaving ON only the color you want to purge or clean. Then do the previously mentioned steps.
Summary of Contents for TELEIOS GRANDE H6
Page 1: ...OPERATOR MANUAL ...