manualshive.com logo in svg

d.gen TELEIOS GRANDE H6, Operator'S Manual

The d.gen TELEIOS GRANDE H6 is a cutting-edge textile printer designed for exceptional print quality and high production speed. To ensure a seamless operation, don't forget to grab your free Operator's Manual available for download at our website. Unlock the full potentials of this remarkable product by referring to the detailed manual provided at manualshive.com.

Share
Download
background image

 

TITLE 

OPERATOR MANUAL 

PAGE 

PRINTERS 

TELEIOS GRANDE H6 

24 

VERSION 

2017JAN23/1 

OUT OF 

REVISED BY 

MUNOZ, ANTONIO 

[email protected] 

64 

 

FOR THE USER 

d·gen International, Inc. - COMPANY PRIVATE (LEVEL 1) 

NOT TO BE DISCLOSED TO UNAUTHORIZED PERSONS – PROHIBIDA SU DIVULGACIÓN A PERSONAS NO AUTORIZADAS 

DO NOT REPRODUCE WITHOUT AUTHORIZATION – NO REPRODUCIR SIN AUTORIZACIÓN

 

 

12 

Raise the upper take-up roller using the side levers. 2 persons needed for this operation. 

 

 

 

13 

Pass the media between the pair of take-up rollers like shown in the illustration bellow and apply 
some tension by pulling the media from the edges. 

 

 

 

 

 

 

 

 

 

Summary of Contents for TELEIOS GRANDE H6

































































Reviews:

No comments

Related manuals for TELEIOS GRANDE H6

Oki C7200 Parts List preview
C7200
Brand: Oki Pages: 17
Oki C7200 Limited Warranty preview
C7200
Brand: Oki Pages: 12
Oki C7200 Handy Reference preview
C7200
Brand: Oki Pages: 30
Oki C7200 Service Manual preview
C7200
Brand: Oki Pages: 391
Oki C7000 Specifications preview
C7000
Brand: Oki Pages: 2
F+D Feinwerk- und Drucktechnik TOP-ino Operating Instructions Manual preview
TOP-ino
Brand: F+D Feinwerk- und Drucktechnik Pages: 22
Lanier LD360 Brochure & Specs preview
LD360
Brand: Lanier Pages: 6
Raymarine e7 Installation And Operation Handbook preview
e7
Brand: Raymarine Pages: 135
EBS Ink-Jet Systems Hi-Res EBS-2600 Manual preview
Hi-Res EBS-2600
Brand: EBS Ink-Jet Systems Pages: 3
Xerox LS 3270 User Manual preview
LS 3270
Brand: Xerox Pages: 55
Oki C650/ES6450 Basic Operation Manual preview
C650/ES6450
Brand: Oki Pages: 180
Ricoh MP 2554SP Series Configuration Manual preview
MP 2554SP Series
Brand: Ricoh Pages: 1
Oki PAGE 8w Lite Setup Manual preview
PAGE 8w Lite
Brand: Oki Pages: 18
Konica Minolta Magicolor 2530 DL Installation Manual preview
Magicolor 2530 DL
Brand: Konica Minolta Pages: 10
TonerRefillKits ReChargX RX180 Instructions Manual preview
ReChargX RX180
Brand: TonerRefillKits Pages: 10
Ricoh SP 4510dn User Manual preview
SP 4510dn
Brand: Ricoh Pages: 955
Xante ColourLaser 21 Series Setup Manual preview
ColourLaser 21 Series
Brand: Xante Pages: 32
Skip-Line CP130 User Manual preview
CP130
Brand: Skip-Line Pages: 11

Brands by name

Popular brands

Load more brands