26
2) Video Profile:
This section provides access to the settings which are
used when streaming to standard network targets such as transceivers
in decoder mode, web browsers or PCs running video software. The
Primary and Secondary stream’s settings can be configured here.
Pressing the “Save” button will activate the settings for the associated
stream.
Note: Both streaming channels are always active and available to be
viewed directly by connecting to the unit using 3rd party video player
software such as VLC or PotPlayer.
Primary Stream:
This are the settings for the main, high resolution/
bitrate stream.
Encoder Mode:
Set the codec to use when transmitting this stream.
Note: H.265 is recommended for 4K streams and H.264 is
recommended for 1080p and below.
Maximum Bitrate (kbps):
Select the maximum bitrate available for
use by the primary stream. Available bitrate is from 100 to 20000kbps.
Maximum Resolution:
Select the maximum resolution for the
primary stream. Available resolutions are: 4K(3840x2160) and
1080p(1920x1080).
Note: The streaming resolution will not exceed the original source’s
resolution even if a higher maximum is selected.
Maximum Frame rate:
Select the maximum framerate to use for this
stream. Valid frame rate choices are: 1~60 fps.
Note: 4K streams can only support a frame rate up to 30fps. 4K@60Hz
sources will automatically be converted to 1080p@60Hz.
