25
6.6.4 Transmitter Tab (Encoder Mode)
This tab is only available when the unit is in Encoder mode. This tab provides
access to multicast and port configuration, video profile control, service
streaming configurations, EDID settings, and Audio routing control.
1) Casting Mode:
Set the encoder’s multicast IP configuration for use by
decoders in the video wall configuration and the unit’s streaming port.
After making changes, press the “Save” button to activate them.
Multicast IP:
Set the multicast group IP address used by decoders in
video wall mode.
Note: It is recommended to select an address between 224.2.0.1 and
224.2.255.255.
TTL:
Set the Time to Live routing value for the multicast group.
Port:
Set the unit’s general streaming port.
Note: All connected decoders must be set to the same port.
