17
2) 802.1x Security:
This section provides a way to enable network security
support for the video streams, if desired.
Note: If an incoming video stream has security enabled, all receiving
units must be configured to support the same security method as the
transmitter.
Authentication:
Use the dropdown to select the network security
protocol, if any, to use for stream transmission. Available choices are:
Disabled, PEAP, TLS, and Tunneled TLS.
Protected EAP (PEAP):
After selecting PEAP, the following settings
must be configured and saved in order to enable PEAP authentication
on this unit. Press “Save” to save the current configuration.
Press “Revert” to undo all unsaved changes made to the current
configuration. Press “Test” to test the PEAP authentication.
-
Anonymous Identity:
Set the publicly viewable identification name
for the connection.
Note: This is optional, but highly recommended to be set.
-
CA Certificate:
Click on the “Browse” button and locate the CA
Certificate file on your local PC then click “Open” to install the
certificate in the unit. To remove an installed CA Certificate, click on
the “Remove” button.
-
Username:
Set the shared username required for authentication.
-
Password:
Set the shared password required for authentication.
