14
6.6.1 Preview Tab
In Encoder mode, this tab provides a limited framerate preview window of
the primary video stream channel generated by the unit. At the bottom of the
tab a connection address for video stream 1 is displayed in the format: “rtsp://
x.x.x.x/stream” (x.x.x.x= the unit’s current IP address). When 3rd party video
player software with RTSP streaming support is used to view streams from
this unit, this is the URL that should be used to connect. To view streaming
channel 2, change “stream” in the address to “stream2”.
In Decoder mode, this tab will display the video stream currently being
received and output. If the unit is in video wall mode, only this unit’s portion
of the video will be displayed.
Note: The primary stream’s configuration is set on the video profile section of
the source unit’s transmitter tab.
1) FPS:
The framerate of the preview window can be set from 1 to 10
frames per second. Click “Save” to save and activate the new preview
frame rate.
