4
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
108&3 &/$0%&3 -"/
.0%&
.&/6
&/5&3
%&$0%&3 7*%&0
4&37*$&
7
6
5
4
3
2
1
1
POWER LED:
This LED will illuminate to indicate the unit is on and
receiving power.
2
ENCODER/DECODER LEDs:
These LEDs will illuminate to indicate if
the unit is in Encoder or Decoder mode.
3
VIDEO LED:
This LED will illuminate when the currently selected video
source is connected and active.
4
LAN LED:
This LED will illuminate when a live Ethernet connection is
detected.
5
SERVICE Port (USB 3.0 Type-A):
Attach a standard USB thumb drive
or external hard drive for storage of recorded video. (Optional)
Note: Storage media must be formatted as FAT32 or exFAT. Video files
are stored in *.mp4 format. Up to 1A is available to power an external
USB device.
6
MODE button:
Press and hold for 2 seconds to toggle between the
Encoder and Decoder operational modes.
Note: After changing modes the unit will automatically reboot.
7
MENU Button:
Press to enter the OSD menu, or to back out from menu
items.
- (MINUS)/+ (PLUS) Buttons:
Press to move up and down or adjust
selections within OSD menus.
Note: In Decoder mode, pressing and holding the + (PLUS) button will
force the output to switch to 1080p60.
ENTER Button:
Press to confirm a selection within the OSD or to go
deeper into a menu item.
