19
Tunneled TLS:
After selecting Tunneled TLS, the following settings must
be configured and saved in order to enable TTLS authentication on this
unit. Press “Save” to save the current configuration. Press “Revert” to
undo all unsaved changes made to the current configuration. Press “Test”
to test the TTLS authentication.
-
Identity:
Set the publicly viewable identification name for the
connection.
-
CA Certificate:
Click on the “Browse” button and locate the CA
Certificate file on your local PC then click “Open” to install the
certificate in the unit. To remove an installed CA Certificate, click on
the “Remove” button.
-
Username:
Set the shared username required for authentication.
-
Password:
Set the shared password required for authentication.
