18
TLS:
After selecting TLS, the following settings must be configured and
saved in order to enable TLS authentication on this unit. Press “Save”
to save the current configuration. Press “Revert” to undo all unsaved
changes made to the current configuration. Press “Test” to test the TLS
authentication.
-
Anonymous Identity:
Set the publicly viewable identification name
for the connection.
Note: This is optional, but highly recommended to be set.
-
CA Certificate:
Click on the “Browse” button and locate the CA
Certificate file on your local PC then click “Open” to install the
certificate in the unit. To remove an installed CA Certificate, click on
the “Remove” button.
-
User Certificate:
Click on the “Browse” button and locate the
User Certificate file on your local PC then click “Open” to install the
certificate in the unit. To remove an installed User Certificate, click
on the “Remove” button.
-
Private Key:
Click on the “Browse” button and locate the Private
Key file on your local PC then click “Open” to install the key in the
unit. To remove an installed Private Key, click on the “Remove”
button.
-
Private Key Password:
Set the shared password required for
authentication.
