Cub Cadet Challenger 550, Service Manual

Page: 62 / 255

2-21
Specifications
CHASSIS TIGHTENING TORQUES
Part to be Tightened Thread
Size
Torque
Nm
Torque
Ft Lbs
Rubber connecting bracket 1(or 2) and frame 10mm 60 44
Engine and Rubber connecting bracket 2 (front) 10mm 60 44
6mm 8 5.9
Engine and Rubber connecting bracket 1 (rear) 8mm 22 16
6mm 8 5.9
Rear upper arm and frame 10mm 60 44
Rear lower arm and frame 10mm 60 44
Rear knuckle and rear upper arm 10mm 60 44
Rear knuckle and rear lower arm 10mm 60 44
Rear shock absorber and frame 10mm 60 44
Rear shock absorber and rear lower arm 10mm 60 44
Rear Balancing pole and frame 8mm 22 16
ball head of Rear Balancing pole and Rear Balancing pole 10mm 60 44
ball head of Rear Balancing pole and rear lower arm 10mm 60 44
Differential gear case and frame 10mm 60 44
Differential gear case filler plug 14mm 120 88
Differential gear case drain plug 10mm 60 44
Universal joint yoke and drive pinion gear 14mm 120 88
Differential motor and differential gear case cover 8mm 22 16
Differential gear case cover and differential gear case 8mm 22 16
Rear driving axle gear case and frame 10mm 60 44
Rear driving axle gear case filler plug 20mm 23 17
Rear driving axle gear case drain plug 10mm 20 14
Ring gear bearing housing and final drive gear case 8mm 22 16
10mm 60 44
Ring gear stopper nut 8mm 22 06
Bearing retainer and final gear pinion gear bearing
housing
65mm 170 125
Coupling gear and final drive pinion gear 12mm 80 58
Front upper arm and frame 10mm 60 44
Front lower arm and frame 10mm 60 44
Front shock absorber and frame 10mm 60 44
Front shock absorber and front upper arm 10mm 60 44
Steering shaft assembly and steering Cross member 8mm 22 16
Steering assembly and steering Cross member 8mm 22 16
Steering assembly and frame 10mm 60 44
Steering shaft assembly and frame 8mm 22 16
Steering wheel and steering shaft assembly 12mm 90 66
Steering knuckle and front upper arm 12mm 45 33