Cub Cadet Challenger 550, Service Manual

Page: 63 / 255

2-22
Specifications
CHASSIS TIGHTENING TORQUE
Part to be Tightened
Thread
Size
Torque
Nm
Torque
Ft Lbs
Steering knuckle and front lower arm 12mm 45 33
Tie-rod locknut 12mm 90 66
Steering knuckle and tie-rod 12mm 60 44
Front lower arm protector board and front lower arm 6mm 8 5.9
Seat belt and frame 10mm 60 44
Seat belt and ceiling (enclosure) 10mm 60 44
Front wheel and front wheel hub 10mm 60 44
Front wheel hub and constant velocity joint of half shaft 20mm 260 190
Steering knuckle and brake disc guard 6mm 8 5.9
Front brake caliper and front wheel steering knuckle 10mm 60 44
Front brake hose union bolt 10mm 60 44
Front brake hose holder and steering knuckle 6mm 8 5.9
Front brake hose holder and front upper arm 6mm 8 5.9
Front brake hose holder and frame 6mm 8 5.9
Front brake pad holding bolt 8mm 22 16
Front brake disc and front wheel hub 8mm 22 16
Front brake caliper bleed screw 6mm 8 5.9
Rear wheel and rear wheel hub 10mm 60 44
Rear wheel hub and constant velocity joint of half shaft 20mm 260 190
Rear brake hose and frame 6mm 8 5.9
Brake pipe and brake master cylinder 10mm 60 44
Pedal holder assembly and frame 8mm 22 16
Brake master cylinder and pedal holder assembly 8mm 22 16
Secondary brake master cylinder kit stopper bolt 6mm 8 5.9
Brake rod locknut 8mm 22 16
Rear brake disc and brake disc Install seat 6mm 8 5.9
Rear brake pad holding bolt 8mm 22 16
Rear brake caliper and Install seat 10mm 60 44
Rear brake hose union bolt 10mm 60 44
Parking brake case and rear brake caliper 8mm 22 16
Parking brake lever assembly and frame 6mm 8 5.9
Rear brake caliper bleed screw 6mm 8 5.9
Cargo bed release lever 6mm 8 5.9
8mm 22 16
Rubber pad and cargo bed assembly 8mm 22 16
Hinge cover and cargo bed assembly 6mm 8 5.9
Cargo bed plastic panel and cargo bed assembly 6mm 8 5.9
Rear mud guard and cargo bed assembly 6mm 8 5.9
Front bumper protector board and front bumper 6mm 8 5.9