CTS FOS-3124 SERIES User Manual Download Page 96

Page: 96 / 223

Read & Write:

Partial access right, not able to modify user account, system

information and items under System Utility menu.

Read Only:

Allow to view only.

Access Denied:

Completely forbidden for access.

NOTE:

To prevent incautious operations, users cannot delete their own account, modify

their own user name and change their own account state.

4.2.1 RADIUS Configuration

Click

RADIUS Configuration

User Authentication

and then the following screen page

appears.

When

RADIUS Authentication

is enabled, User login will be according to those settings on

the RADIUS server(s).

NOTE:

For advanced RADIUS Server setup, please refer to

APPENDIX A

or the “free

RADIUS readme.txt” file on the disc provided with this product.

Secret Key:

The word to encrypt data of being sent to RADIUS server.

RADIUS Port:

The RADIUS service port on RADIUS server.

Retry Time:

Times of trying to reconnect if the RADISU server is not reachable.

RADIUS Server Address:

IP address of the first RADIUS server.

2nd RADIUS Server Address:

IP address of the second RADIUS server.

Summary of Contents for FOS-3124 SERIES
































































































































































































































Search results

Summary of Contents for FOS-3124 SERIES

Reviews:

Related manuals for FOS-3124 SERIES

Brands by name

Popular brands

CTS FOS-3124 SERIES, User Manual

Search results

Summary of Contents for FOS-3124 SERIES

Reviews:

Related manuals for FOS-3124 SERIES

Brands by name

Popular brands