CTS FOS-3124 SERIES, User Manual

Page: 46 / 223

46
2.6.8 Loop Detection Command
Command Parameter Description
Switch(config)# loop-detection Enable Loop Detection function.
Switch(config)# loop-detection
interval [1-180] [0-180] Set up Loop Detection time interval
from 1 to 180 seconds.
Switch(config)# loop-detection
unlock-interval [1-1440] [1-1440] Set up Loop Detection unlock time
interval fromo 1440 minutes.
Switch(config)# loop-detection
vlan-id [1-4094] [1-4094] Set up Loop Dtection VLAN ID.
No command
Switch(config)# no loop-detection Disable Loop Detection function.
Switch(config)# no loop-detection
interval Reset Loop Detection time interval to
default setting.
Switch(config)# no loop-detection
unlock-interval Reset Loop Detection unlock time
interval to default setting.
Switch(config)# no loop-detection
vlan-id Reset Loop Detection unlock time
interval to default setting.
Show command
Switch(config)# show loop-
detection Show Loop Detection settings.
Switch(config)# show loop-
detection status [port_list] [port_list] Show Loop Detection status of the
ports.
Loop Detection command example
Switch(config)# loop-detection interval 60 Set the Loop Detection time interval
to 60 seconds.
Switch(config)# loop-detection unlock-interval 120 Set the Loop Detection unlock time
interval to 120 minutes.
Switch(config)# loop-detection vlan-id 100 Set the Loop Detection VLAN ID to
100.
Use “Interface” command to configure a group of ports’ Loop Detection settings.
Dot1x & Interface command Parameter Description
Switch(config)# interface [port_list] [port_list] Enter several discontinuous port
numbers separated by commas or a
range of ports with a hyphen. For
example:1,3 or 2-4
Switch(config-if-PORT-PORT)#
loop-detection Enable Loop Detection function on the
specific ports.
No command
Switch(config)# interface [port_list] [port_list] Enter several discontinuous port
numbers separated by commas or a
range of ports with a hyphen. For
example:1,3 or 2-4
Switch(config-if-PORT-PORT)# no
loop-detection Disable Loop Detection function on
the specific ports.