60
vlan [1-4094]
[1-4094]
Specify the VLAN where the packets
with the Destination MAC address can
be forwarded.
Switch(config-if-PORT-
PORT)# mac learning
Enable MAC learning function.
No command
Switch(config-if-PORT-
PORT)# no mac address-
table static-mac
[xx:xx:xx:xx:xx:xx] vlan [1-
4094]
[xx:xx:xx:xx:xx:xx] Remove the specified MAC address
from the address table.
[1-4094]
Specify the VLAN to that the specified
MAC belongs.
Switch(config-if-PORT-
PORT)# no mac learning
Disable MAC learning function.
Show command
Switch(config)# show mac address-table
Show MAC addresses learned by the
Managed Switch
Switch(config)# show mac address-table clear
Clear MAC address table.
Switch(config)# show mac address-table interface
[port_list]
Show MAC addresses learned by the
specified interfaces.
Switch(config)# show mac address-table mac
[mac-addr]
Show the specific MAC address
information.
Switch(config)# show mac learning
Show MAC learning setting of each
interface.
Switch(config)# show mac static-mac
Show static MAC address table.
Switch(config)#show mac aging-time
Show current MAC address table
aging time or verify currently
configured aging time.
2.6.13 Management Command
Command
Parameter Description
Switch(config)# management
console timeout [0 | 5-9999]
[0 | 5-
9999]
To disconnect the Managed Switch when
console management is inactive for a
certain period of time.
Specify
“0” to disable timeout function.
The allowable value is from 5 to 9999
seconds.
Switch(config)# management
telnet
To management the Managed Switch via
Telnet.
Switch(config)# management
telnet port [1025-65535]
[1025-
65535]
When telnet is enabled, you can set up the
port number that allows telnet access.
The default port number is set to 23.
However, you can also identify a port
number between 1025 and 65535.
Summary of Contents for FOS-3124 SERIES
Page 202: ...202 Restart DHCP service ...
