168
Destination Port Range:
Specify a destination port range (The source port number
is from 0 to 65535).
TCP Parameters
Source Port Filter:
Select “Any” to filter frames from any source port. If “Specific” is
selected, you need to further specify a source port number. If “Range” is selected,
you need to further specify a source port range.
Source Port NO.:
Specify a source port number (0~65535).
Source Port Range:
Specify a source port range (The source port number is from 0
to 65535).
Destination Port Filter:
Se
lect “Any” to filter frames to any destination port. If
“Specific” is selected, you need to further specify a destination port number. If
“Range” is selected, you need to further specify a destination port range.
Destination Port NO.:
Specify a destination port number (0~65535).
Destination Port Range:
Specify a destination port range (The source port number
is from 0 to 65535).
TCP FIN:
Select “0” to indicate that the FIN value in TCP header is zero; “1” to
indicate the FIN value in TCP header is one. Select “any” to indicate either 1 or 0.
TCP SYN:
Select “0” to indicate that the SYN value in TCP header is zero; “1” to
indicate the SYN value in TCP header is one. Select “any” to indicate either 1 or 0.
TCP RST:
Select “0” to indicate that the RST value in TCP header is zero; “1” to
indicate the RST value in TCP header is one. Select “any” to indicate either 1 or 0.
TCP PSH:
Select “0” to indicate that the PSH value in TCP header is zero; “1” to
indicate the PSH value in TCP header is one. Select “any” to indicate either 1 or 0.
TCP ACK:
Select “0” to indicate that the ACK value in TCP header is zero; “1” to
indicate the ACK value in TCP header is one. Select “any” to indicate either 1 or 0.
TCP URG:
Select “0” to indicate that the URG value in TCP header is zero; “1” to
indicate the URG value in TCP header is one. Select “any” to indicate either 1 or 0.
Summary of Contents for FOS-3124 SERIES
Page 202: ...202 Restart DHCP service ...
