CTS FOS-3124 SERIES, User Manual

Page: 18 / 223

18
[0-7] 802.1p_list
[0-63] dscp_list Specify one value, more than one value or a
range of values.
Example 1: specifying one value
Switch(config)#qos 802.1p-map 1 0
Switch(config)#qos dscp-map 10 3
Example 2: specifying three values
(separated by commas)
Switch(config)#qos 802.1p-map 1,3 0
Switch(config)#qos dscp-map 10,13,15 3
Example 3: specifying a range of values
(separated by a hyphen)
Switch(config)#qos 802.1p-map 1-3 0
Switch(config)#qos dscp-map 10-15 3
2.3.4 Login Username & Password
Default Login
When you enter Console session, a login prompt for username and password will appear to
request a valid and authorized username and password combination. For first-time users,
enter the default login username
“
admin
”
and
“
press Enter key
” in password field (no
password is required for default setting)
. When system prompt shows “Switch>”, it means
that the user has successfully entered the User Mode.
For security reasons, it is strongly recommended that you add a new login username and
password using User command in Configuration Mode. When you create your own login
username and password, you can delete the default username (admin) to prevent
unauthorized accesses.
Enable Mode Password
Enable mode is password-protected. When you try to enter Enable Mode, a password
prompt will appear to request the user to provide the legitimate passwords. Enable Mode
password is the same as the one entered after login password prompt. By default, no
password is required. Therefore, press
Enter key in password prompt.