111
4.4.3.3 LACP Port Configuration
The Managed Switch supports dynamic Link Aggregation Control Protocol (LACP) which is
specified in IEEE 802.3ad. Static trunks have to be manually configured at both ends of the
link. In other words, LACP configured ports can automatically negotiate a trunked link with
LACP configured ports on other devices. You can configure any number of ports on the
Managed Switch as LACP, as long as they are not already configured as part of a static
trunk. If ports on other devices are also configured as LACP, the Managed Switch and the
other devices will negotiate a trunk link between them. If an LACP trunk consists of more
than four ports, all other ports will be placed in a standby mode. Should one link in the trunk
fail, one of the standby ports will automatically be activated to replace it.
Configure Port Protocol:
Click the option
LACP Port Configuration
from the
Link Aggregation
menu and then
select “Protocol” from the pull-down menu of Select Setting. The screen page is shown
below.
This allows LACP to be enabled or disabled on each port.
Summary of Contents for FOS-3124 SERIES
Page 202: ...202 Restart DHCP service ...
