CTS FOS-3124 SERIES, User Manual

Page: 85 / 223

85
Switch(config)# user radius server1
192.180.3.1 Set the primary RADIUS server address to
192.180.3.1.
Switch(config)# user radius server2
192.180.3.2 Set the secondary RADIUS server address
to 192.180.3.2.
2.6.24 Syslog Command
Syslog command Parameter Description
Switch(config)# syslog Enable system log function.
Switch(config)# syslog
server1 [A.B.C.D] [A.B.C.D] Specify the primary system log server IP
address.
Switch(config)# syslog
server2 [A.B.C.D] [A.B.C.D] Specify the secondary system log server IP
address.
Switch(config)# syslog
server3 [A.B.C.D] [A.B.C.D] Specify the third system log server IP
address.
No command
Switch(config)# no syslog Disable System log function.
Switch(config)# no syslog server1 Delete the primary system log server IP
address.
Switch(config)# no syslog server2 Delete the secondary system log server IP
address.
Switch(config)# no syslog server3 Delete the third system log server IP
address.
Show command
Switch(config)# show syslog Show current system log settings.
Switch(config)# show log Show event logs currently stored in the
Managed Switch. These event logs will be
saved to the system log server that you
specify.
Syslog command example
Switch(config)# syslog Enable System log function.
Switch(config)# syslog server1
192.180.2.1 Set the primary system log server IP address
to 192.168.2.1.
Switch(config)# syslog server2
192.168.2.2 Set the secondary system log server IP
address to 192.168.2.2.
Switch(config)# syslog server3
192.168.2.3 Set the third system log server IP address to
192.168.2.3.